>Fittings AMBICAFLEX is also providing fittings at one or both end of metal hose. Stainless Steel Corrugate Hose fittings are directly welded at end of hose but strip wound hose fittings are specially made and attached to end of hose without welding. Please select fittings from below range of standard firings providing by AMBICAFLEX. For non standard fittings or any special requirement please CONTACT US.
CONTRUCTION MATERIAL :
TYPE :
1. SWIVEL FEMALE or MALE
Size: 12MM (½” Inch) To 50MM (2” Inch)
2. SWIVEL FEMALE WITH 45° or 90° BEND
Size: 12MM (½” Inch) To 50MM (2” Inch)
3. FIXED FLANGE
Size: 12MM (½” Inch) To 300MM (12” Inch)
4. STUBEEND WITH REVOLVING FLANGE
Size: 12MM (½” Inch) To 300MM (12” Inch)
5. CAM-LOCK COUPLING
Size: 12MM (½” Inch) To 150MM (6” Inch)
6. FIXED MALE NIPPLE or FEMALE COUPLING
Size: 12MM (½” Inch) To 100MM (4” Inch)
7. FIXED HEX MALE
Size: 12MM (½” Inch) To 100MM (4” Inch)
8. FIXED FEMALE UNION
Size: 12MM (½” Inch) To 100MM (4” Inch)
9. SHORT AND LONG 45° or 90° BEND END
Size: 12MM (½” Inch) To 300MM (12” Inch)
10. REDUCER END
Size: 25MM (1” Inch) To 300MM (12” Inch)
11. BEVELED PIPE END
Size: 12MM (½” Inch) To 300MM (12” Inch)
12. SANITARY FLANGE
Size: 25MM (1” Inch) To 75MM (3” Inch)
